Shift Lock Release, Release Spring, and Release Shaft Replacement (A/T)

Shift Lock Release, Release Spring, and Release Shaft Replacement

1. Remove the A/T gear position indicator panel base A/T Shift Lever Boot and A/T Gear Position Indicator Panel Base Replacement.

2. Release the lock tab (A) of the shift lock release (B), then remove the shift lock release and the release spring (C).





3. Release the lock tab (D) of the release shaft (E), and remove the release shaft (F).

4. Replace the shift lock release, the release spring, or the release shaft.

5. Install the release spring (A) in the shift lock release (B).





6. Install the release shaft (C) in the shift lever, and install the shift lock release and the release spring on the release shaft end.

7. Make sure that the release spring end (A) is installed in the shift lock release (B), and the other end (C) of the release spring is on the stop (D).





8. Install the A/T gear position indicator panel base A/T Shift Lever Boot and A/T Gear Position Indicator Panel Base Replacement.