Trunk / Liftgate Spring: Service and Repair

Trunk Lid Torsion Bar Replacement

Special Tools Required

- Torsion Bar Assembly Tool 07AAF-SNAA100

NOTE: Put on gloves to protect your hands.

1. Remove the trunk side trim panels from both sides.

2. Remove the trunk lid torsion bars (A) from the torsion bar center clip (B).






3. Remove the torsion bars with the torsion bar assembly tool from both trunk lid hinges. First remove the left torsion bar (A), then remove the right torsion bar (B).






4. Remove the torsion bar center clip (A) from the body.






5. Install the torsion bars in the reverse order of removal, and note these items:

- The shapes of the right torsion bar (A) and the left torsion bar (B) are shown. Install the torsion bars properly.
- Adjust the torsion bars forward or rearward with the torsion bar assembly tool.
- The torsion bars were installed at the factory in the normal position as shown.
- Make sure the trunk lid opens properly and locks securely.