A/T Gear Position Indicator Does Not Come On With the Shift Lever Is In That Position

A/T gear position indicator does not come on with the shift lever in that position

F-CAN communication line error

Gauge control module defective

Transmission range switch defective or out of adjustment

Shift cable broken or out of adjustment

Connection between shift cable and transmission or shift lever is worn

PCM defective

Notes

Check the F-CAN communication line F-CAN Circuit Troubleshooting.

Notes

Check the F-CAN communication line by using the gauge control module self-diagnostic function.

Notes

Check the A/T gear position indicator drive circuit in the gauge control module by using the gauge control module self-diagnostic function.

Notes

Inspect the transmission range switch Testing and Inspection.