Tailgate Latch Switch Circuit Troubleshooting
Keyless/Power Door Locks/Security System Symptom Troubleshooting - Tailgate latch switch circuit troubleshooting
Tailgate latch switch circuit troubleshooting (Without Power Tailgate)
1. Turn the ignition switch to ON (II).
2. With the tailgate closed, select SECURITY with the HDS, and enter the DATA LIST.
3. Check the ON/OFF information of the TRUNK LID/TAILGATE SWITCH in the DATA LIST.
Is information indicator ON?
YES -
Go to step 4.
NO -
Go to step 8.
4. Disconnect the tailgate latch 3P connector.
5. Check the ON/OFF information of the TRUNK LID/TAILGATE SWITCH in the DATA LIST.
Is information indicator OFF?
YES -
Faulty tailgate latch switch; replace the tailgate latch Service and Repair.
NO -
Go to step 6.
6. Disconnect driver's under-dash fuse/relay box connector D (16P).
7. Check for continuity between driver's under-dash fuse/relay box connector D (16P) terminal No. 5 and body ground.
Is there continuity?
YES -
Repair a short to ground in the wire.
NO -
Faulty driver's MICU; replace the driver's under-dash fuse/relay box, USA models Driver's Under-Dash Fuse/Relay Box (Driver's MICU) Removal and Installation (USA Models), Canada models Driver's Under-Dash Fuse/Relay Box (Driver's MICU) Removal and Installation (Canada Models).
8. Disconnect the tailgate latch 3P connector.
9. Connect tailgate latch 3P connector terminal No. 1 and body ground with a jumper wire.
10. Check the ON/OFF information of the TRUNK LID/TAILGATE SWITCH in the DATA LIST.
Is information indicator ON?
YES -
Go to step 11.
NO -
Go to step 12.
11. Check for continuity between tailgate latch 3P connector terminal No. 2 and body ground.
Is there continuity?
YES -
Faulty tailgate latch switch; replace the tailgate latch Service and Repair.
NO -
Repair an open or high resistance in the ground wire or poor ground (G901).
12. Connect driver's under-dash fuse/relay box connector D (16P) terminal No. 5 and body ground with a jumper wire.
13. Check the ON/OFF information of the TRUNK LID/TAILGATE SWITCH in the DATA LIST.
Is information indicator ON?
YES -
Repair an open or high resistance in the wire.
NO -
Faulty driver's MICU; replace the driver's under-dash fuse/relay box, USA models Driver's Under-Dash Fuse/Relay Box (Driver's MICU) Removal and Installation (USA Models), Canada models Driver's Under-Dash Fuse/Relay Box (Driver's MICU) Removal and Installation (Canada Models).