Manufacturer Code Charts: 1001

Navigation System DTC Troubleshooting: 1001

DTC 1001:

FROM System Info Error

NOTE:

- Check the vehicle battery condition first Battery Test.
- This navigation DTC sets when there is an internal problem with the Flash-ROM.
- Check any official Honda service website for more service information about the navigation system.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information How To Troubleshoot The Navigation System.

1. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode, then back to ON (II), or press the engine start/stop button to select the ON mode.

2. Check for the hard error code.

Is DTC 1001 indicated?

YES -

Replace the audio-navigation unit Audio-Navigation Unit Removal/Installation.

NO -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the audio-navigation unit Audio-Navigation Unit Removal/Installation.