Manufacturer Code Charts: 1402

Navigation System DTC Troubleshooting: 1402

DTC 1402:

Audio Error 2 (CD Error)

NOTE:

- Check the vehicle battery condition first Battery Test.
- This navigation DTC sets when the audio-navigation unit detects a mechanical malfunction in the CD/DVD player.
- Check any official Honda service website for more service information about the navigation system.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information How To Troubleshoot The Navigation System.

1. Check that the temperature is between -4 °F (-20 °C), below 158 °F (70 °C) in the dash.

2. Clear the hard error code.

3. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode, then back to ON (II), or press the engine start/stop button to select the ON mode.

4. Check for the hard error code.

Is DTC 1402 indicated?

YES -

Replace the audio-navigation unit Audio-Navigation Unit Removal/Installation.

NO -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the audio-navigation unit Audio-Navigation Unit Removal/Installation.