Manufacturer Code Charts: 2610
Navigation System DTC Troubleshooting: 2610
DTC 2610:
DRAM Diag
NOTE:
- Check the vehicle battery condition first Battery Test.
- This navigation DTC sets when a problem with the audio-navigation unit internal DRAM is detected.
- Check any official Honda service website for more service information about the navigation system.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information How To Troubleshoot The Navigation System.
1. Clear the hard error code.
2. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode, then back to ON (II), or press the engine start/stop button to select the ON mode.
3. Go into the System Diagnostic Mode, and select the Self-Diagnosis Mode.
4. Select the ECU Info in the System Links.
Is D-RAM OK indicated?
YES -
Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the audio-navigation unit Audio-Navigation Unit Removal/Installation.
NO -
Replace the audio-navigation unit Audio-Navigation Unit Removal/Installation.