62-1

VSA DTC Troubleshooting: 61-1, 62-1

DTC 61:

Battery Voltage Low

DTC 62:

Battery Voltage High

NOTE:

- If the vehicle has high electric load or a weak battery, DTC 61 may be stored when starting the engine.
- An overcharging alternator can cause DTC 62.
- Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information Reading and Clearing Diagnostic Trouble Codes.

1. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.

2. Clear the DTC with the HDS.

3. Turn the ignition switch to LOCK (0), then turn it to ON (II) again, or select the OFF mode, then the ON mode.

Does the ABS indicator come on?

YES -

Go to step 4.

NO -

Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting.

4. Check for DTCs with the HDS.

Is DTC 61 or 62 indicated?

YES -

Check the battery Battery Test and alternator and regulator circuit troubleshooting Alternator and Regulator Circuit Troubleshooting.

NO -

Do the appropriate troubleshooting for the DTC indicated.