Manufacturer Code Charts: 97

TPMS DTC Troubleshooting: 91, 93, 95, 97

DTC 91, 93, 95, 97:

Tire Pressure Sensor Internal Error

1. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.

2. Clear the DTC with the HDS.

3. Turn the ignition switch to LOCK (0) and then back to ON (II), or press the engine start/stop button to select the OFF mode and then the ON mode.

4. Wait about 1 minute.

5. Check for DTCs with the HDS.

NOTE: The tire pressure sensor of the appropriate wheel is shown.





Is DTC 91, 93, 95, or 97 indicated?

YES -

Replace the appropriate tire pressure sensor Service and Repair.

NO -

Intermittent failure, the system is OK at this time.