Advanced Diagnostics
Advanced Diagnostics - DTC P2610: Powertrain Control Module (PCM) Ignition Off Internal Timer MalfunctionGeneral Description
The powertrain control module (PCM) has a built-in ignition off timer that measures the duration of time from ignition off to the next ignition on. The measured duration is used for evaporative emission (EVAP) leak detection and temperature assumption of the catalytic converter. The CPU in the PCM accesses the ignition off timer when reading the measured duration. If the access process fails, a malfunction is detected and a DTC is stored. When an abnormality is found in the read data, the PCM detects a malfunction and stores a DTC.
Monitor Execution, Sequence, Duration, DTC Type, OBD Status
Enable Conditions
Malfunction Threshold
The access process to the ignition off timer fails, or a malfunction is found in the read data for at least 10 seconds.
Diagnosis Details
Conditions for setting the DTC
When a malfunction is detected, the MIL comes on and a Pending DTC, a Confirmed DTC, and the freeze data are stored in the PCM memory.
Conditions for clearing the DTC
The MIL is cleared if the malfunction does not return in three consecutive trips in which the diagnostic runs. The MIL, the Pending DTC, the Confirmed DTC, and the freeze data can be cleared with the scan tool Clear command or by disconnecting the battery.