Cowl Moulding / Trim: Service and Repair

Cowl Cover Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; call 888-424-6857

NOTE:

- Take care not to scratch the cowl cover or the body.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove these items:

- Front fender trims, both sides
- Windshield wiper arms Service and Repair

2. Detach the clips securing the cowl cover (A) with a trim tool.





3. If necessary, remove the hood rear seal (B) from the hooks (C) (12 places).

4. Remove the cowl cover (A).

1. Detach the clips (B, C).

2. Release the hooks (D) of the hood hinge covers (E) from the windshield side trim (F).

3. Pull the cover forward to release the hooks (G).





5. Install the cover in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the hooks into place securely.