A-Pillar Corner Trim Replacement

A-Pillar Corner Trim Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; call 888-424-6857

NOTE:

- Take care not to scratch the trim or the body.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Open the front door.

2. Carefully insert a trim tool next to the upper clip, then detach the clip by prying on the A-pillar corner trim (A).






3. Detach the remaining lower clips with a trim tool, then remove the A-pillar corner trim (A).






4. Install the trim in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.