C-Pillar Outer Trim Replacement

C-Pillar Outer Trim Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; call 888-424-6857

NOTE:

- Take care not to scratch the trim or the body.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Open the rear door and the tailgate.

2. Pry up on the edge of the C-pillar outer trim (A) with a trim tool to detach the clips, then remove the trim.





3. Install the trim in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.