Mirror Holder Replacement

Mirror Holder Replacement

NOTE:

- Put on gloves to protect your hands.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Carefully push on the top edge of the mirror holder (A) by hand.





2. Put a shop towel in the opening between the bottom edge of the mirror holder and the mirror housing (B) to prevent scratches. Insert a flat-tip screwdriver under the mirror holder, and detach the lower clips (C).

3. Carefully pull out the bottom edge of the mirror holder (A), and then release the upper clips (B).





4. Separate the mirror holder from the actuator (C), and disconnect the mirror defogger connectors (D).

5. Reconnect the mirror defogger connectors (A).





6. Align the tabs (B) on the mirror holder (C) so they line up on each side of the actuator tabs (D). Carefully push on the mirror holder until it locks into place.

7. Check the actuator operation.