Fuel Pressure Regulator: Service and Repair

Fuel Pressure Regulator Replacement

1. Remove the fuel tank unit Fuel Tank Unit Removal/Installation.

2. Remove the reservoir (A).






3. Remove the bracket (A).





4. Remove the clip (B).

5. Remove the fuel pressure regulator (C) and the backup ring (D).

6. Install the parts in the reverse order of removal with new O-rings (E). When installing the fuel tank unit, align the marks on the fuel tank unit and the fuel tank.

NOTE:

- Coat the O-rings with clean engine oil; do not use any other oil or fluid.
- Do not pinch the O-rings during installation.
- Use all the new parts supplied in the pressure regulator replacement kit.