Tools - New Transmission Support Tool 3147
86audi1Applies To
ALL LONGITUDINAL
MOUNTED ENGINES
ALL YEARS
Group
10
Subject
Special Too 3147
Part Identifier N/A
Key Points
New transmission support tool 3147
A175b
Number
86-01
May 5, 1986
When removing/installing engine, tool 3147 and support bar 10-222A will be used instead of support tool VW 785/1b on all longitudinal mounted engines.
Work sequence
- remove left upper engine transmission bolt
- insert tool 3147 into empty hole
- position support bar 10-222A on inner fender mounting area
- attach draw hook as shown
- raise/lower transmission with wing nut to desired height
Note
Unclip distributor cap, laying it to one side when placing tool 3147 into position. Take care not to damage ignition wiring.