Plastilube Moly 3 - Proper Procedures Obtaining
88audi10Subject: Plastilube Moly 3
Proper Procedures for Obtaining Plastilube 3
Number: 88-11
Oct. 31, 1988
Need to know: Service Managers, Parts Managers, Service Advisors
General:
Product Circular Group 46, Number 88-03, dated August 24, 1988 contains a work procedure for the reduction of brake noise. For maximum effectiveness, it is necessary to use Plastilube Moly 3 as stated in the Product Circular.
Plastilube Moly 3 is a product of the Thiem Corporation located in Cleveland, Ohio. The product can be obtained from Thiem itself or through one of its five distributors. If purchased directly from Thiem, it must be purchased by the case which contains thirty tubes. However, the distributors will break-up the cases and sell the product in any quantity you wish. Contact either the Thiem corporate headquarters or the distributor of your choice in order to obtain this product.
Corporate Headquarters: Thiem Corporation 5151 Denison Ave. P.O. Box 93019 Cleveland, OH 44101-5019 (216) 651-2010 (800) 225-4713
Distributor Locations: Acme Bearing Co. 1387 Niagara Street Buffalo, NY 14213 (716) 885-9000
Gipson Bearing & Supply, Co. Jerry Ross Welding
13100 Enterprise Ave. R.D. No. 3
Cleveland, OH 44135 Dark Hallow Rd.
(216) 433-4555 Turkhanaock, PA 18657
(717) 836-3066
Uranich Coal Voss Petroleum
2405 St. Vincents Ave. Box 127
P.O. Box 1103 Iowa City, IA 52240
La Salle, IL 61301 (319) 337-4200
(815) 223-2400