Roof Trim Moldings - Removal

84audi2

Applies To

4000

4000 QUATTRO
Group


66
Subject

Roof Trim Moldings

Part Identifier N/A
Key Points

Procedure for removal

A 74
Number

84-01

March 30, 1984
Roof trim moldings, removing

Work sequence



- carefully drill out hollow rivets (arrows)
- take off roof trim molding (D)
- remove rear seat and backrest (see Repair Manual, Group 72)



- remove parcel shelf
- remove nut (5) and washers
- remove air outlet molding (E in top photo)
Note

If the air outlet trim molding is to be removed and replaced separately, drill out hollow rivet on trim molding joint sleeve and remove nut (5).