Engine Controls - Checking/Adjusting
87audi06Applies To: 5000S 1985-1987
Subject: Engine Controls - Checking/Adjusting
Number: Group:
87-10
25
October 12, 1987
Idle Stabilizer Valve
Test Connector
Fig. 1 - Loose Connector:
Fig. 2 - Fastened Connector:
The test connector (arrow Fig. 1) for checking idle stabilizer duty cycle should be fastened to the wiring harness as shown in Fig. 2.
If you find the connector loose or if you loosen it to perform tests, be sure to re-fasten it as shown. If the clip is broken or missing, replace it using part number:
811 971 850.
Caution
Part numbers are for reference only. Always consult your parts department for the latest information.