Turbocharger: Service Precautions

CAUTION: When working on turbocharger always follow precautions on cleanliness below

- Thoroughly clean all unions and area near connections before disconnecting
- Place removed parts on a clean surface and cover over. Use paper or plastic sheet. Do not use fluffy cloths
- Components which have been opened or disassembled must be covered or sealed carefully if repair cannot be carried out immediately
- Install clean components only
- Do not unpack replacement parts until immediately before installation
- Do not use parts that have been stored loose (for instance, in toolboxes)
- When fuel system is open, do not work with compressed air if this can be avoided, nor should car be moved, unless absolutely necessary