Sunroof Assembly, Installing

Sunroof lid, installing






Install sunroof lid in opening
Start all screws and bolts but do NOT tighten






Check that mark on rear guide aligns with mark on guide rail (both. sides)

CAUTION: Sunroof drive gear must not be engaged when trying to check parallel running of sunroof cables.

CAUTION: When lining up cables to guide rail, always move cables from front of vehicle rearward to marking lines. Do not move cables from rear of vehicle forward to marking lines.






Check that serrations mesh on sunroof lid and rear guide
If NOT
Loosen screws (arrows) and adjust
Tighten screws
2.0 Nm