Engine - Poor Driveability DTC 2132 Set

91audi01

Group: 25

Number: 91-02

Date: March 31, 1991


Subject: Fault Code 2132

Model(s): All with CIS-E III
Fuel/ignition system 1988-1991 m.y.


Symptoms: A) Poor driveability WITH Fault Code 2132 or

B) Fault Code 2132 with NO
driveability complaint.

Condition: Incorrect Fuel and/or Ignition control unit inadveriently installed in vehicle.





Service Verify that part numbers of control
solution: units in vehicle agree with those given in the reference chart on next page.

Before using the reference chart:

^ you MUST identify which one of the following emission certification categories the vehicle in question belongs to:

^ California

^ 49 States

^ Canada

^ Obtain this information from the Vehicle

Emissions Control Information label, located in the engine compartment It will appear on the bottom of the label as ONE of the following:

^ California = This vehicle conforms to California regulations.

^ 49 States = This vehicle conforms to US EPA regulations.

^ Canada = This vehicle conforms to CMVS regulations applicable to 19__ model year, new motor vehicles.

^ also identify the vehicle in question by using the "system identification" characteristics listed in the reference chart

If Fault code 2132 is present:

^ follow troubleshooting procedures for Fault Code 2132 as outlined in Repair Group D2 of the appropriate Repair microfiche


Note

Fault Code 2132 applies to ALL US vehicles. In the past this code has erroneously been described as applying ONLY to California vehicles.

For the purposes of this circular, when making comparisons with the reference chart:

^ ignore any color coded dots that might accompany the part numbers on the control units


CAUTION

Part numbers are for reference only. Always check with the Parts Department for the latest information.