Service

Align vehicle head lamps, using the VAS 5107 (Hella Universal Beamsetter IV) and the following procedure:

Also see the Instruction Manual for the Hella Beamsetter Series IV for additional instructions and diagrams.





- Position vehicle on a flat floor surface that meets the following (ISO 10640) specifications:

^ 0.5 mm or less slant from front wheel to back wheel of the Beamsetter -A-.

^ 1 mm or less slant per meter for the length of the vehicle -B-.

- Clean headlight lenses.

- Adjust vehicle tire pressure to specifications.

- Have a second Technician sit in the driver's seat while aligning the headlights.

- Bounce front and rear of vehicle up and down several times to settle vehicle suspension.