Windshield - Sealing Strip Molding Detached, Sagging

9220audi03

64-89-T03
Dec 88


80
80 Quattro
90 Quattro
M.Y. 1988-89


Front/Rear Windshield - Sealing Strip Molding Detached, Sagging





Cause:
A. Unfavorable tolerance between glass and sealing strip molding.

B. Insufficient amount of adhesive applied to sealing strip molding.

May 89
Production:
A. Modified U-profile.
As of: February 1989
VIN: 89_KA184549

B. Application of adhesive improved.
As of: August 1988
VIN: 89_KA047588

Service:
A. N/A.

B. Do not replace sealing strip molding. Pull loose sealing strip molding back and apply additional adhesive sealant, P/N D 009 100 03, or equivalent (such as 3M Quick Fix Adhesive No. 08155) to marked area "All and lightly press sealing strip molding into place. Clean off surplus adhesive sealant. Let sealant dry at least three hours (20 degrees C. and 65% to 70% humidity) before vehicle is driven.

NOTE:
Ensure adequate ventilation.