Body - Bumper Cover Molding Sleeve Falls Down
90audi0163-90-T01 Sleeve For Bumper Cover Molding - Loose, Falls Down
Jan 90
89/90/Quattro M.Y. 1988-90
Cause: Excessive paint applied to inside and to tabs of sleeve and/or to outside edges of molding. Sleeve does not snap on properly.
Production: Paint thickness at tabs and edges reduced.
As of: November 1989
VIN: 8A_LA100508
Service: Replace sleeve P/N 893807553/4B (Plus color code) P/N unchanged
Note: If replacement sleeve is painted in body color, do not apply paint inside of sleeve and the tabs paint carefully.