Timing Belt: Locations

1 - 10 Nm (7 ft lb)
2 - Drive belt cover (upper)
3 - Drive belt

NOTE
Mark running direction betore removing, this orientation MUST be maintained when reinstalling.

4 - Bushings
5 - 65 Nm (48 ft lb) (use VW 544 to loosen/tighten)
6 - Camshaft drive sprocket
7 - Drive belt cover (lower)
8 - 350 Nm (258 ft lb) (use special tools 2079 and 2084)
9 - 20 Nm (I5ft lb)
10 - Vibration damper (note position when installing drive belt)
11 - 10 Nm (7 ft lb)
12 - Drive belt cover (lower)
13 - Crankshaft drive belt sprocket
14 - Idler pulley 10 Nm (7 ft lb)
15 - 20 Nm (15 ft Ib)
16 - Water pump (turn to left to tension drive belt)
17 - O-ring (after removing the water pump on older engines it is recommended that the sealing surfaces be cleaned and the 0-ring replaced)