Sunroof / Moonroof Module: Service and Repair

Sunroof control unit, removing/installing

Removing






Remove sunroof motor. Refer to sunroof motor removal/installation Service and Repair

Disconnect plugs A, B, C
Remove bolts (arrows), take off control unit

Installing

Reinstall in reverse order of removal, noting the following:

Note: Sunroof motor must be set to "0" position before installing into vehicle

Set control switch to position 4
Switch ignition on
Motor will automatically move to "0" position

Reinstall sunroof motor into vehicle Refer to sunroof motor removal/installation Service and Repair