Page 91.53 - Static Noise & Frequency Changing

CD changer system, troubleshooting 91-53


^ reinstall left knee bar
^ reconnect airbag power supply connector
^ reconnect battery ground strap
^ reactivate (code) radio
^ check CD changer operation

Static when listening to CD

A strong station broadcasting at 88.3MHz in the customer's area can cause static while listening to the CD. If static is heard, change the CD frequency switch on the CD changer controller to 88.7MHz.

CD frequency switch, changing

Note

The CD changer frequency switch is set to 88.3MHz at the factory.

^ obtain radio security code
^ disconnect battery ground strap
^ disconnect airbag power supply connector
^ remove left knee bar securing screws and carefully lower knee bar
^ CD changer controller mounted to knee bar





^ adjust CD changer frequency switch (arrow) to 88.7MHz


^ reinstall left knee bar
^ reconnect airbag power supply connector
^ reconnect battery ground strap
^ reactivate (code) radio
^ check CD changer operation