Steering Column Lock - Washers/Spring
GROUP: 48NUMBER: 91-01
DATE: May 31, 1991
SUBJECT:
Lock washers/spring, pressing onto steering column
MODEL(S):
80/90, 80/90 Quattro, Coupe Quattro 1991 m.y.
If the steering column and column tube are separated from each other during repairs, install the spring and the two lock washers on the column as follows:
^ install spring onto steering column
^ place new lock washers on column
^ install tensioner 3168 and thread nut b down to stop
^ hold spindle at a while tightening nut b until spring is compressed to dimension C
^ dimension C = 10-12 mm (0.39-0.47 in.)
Note
Measure dimension c between face side of sleeve tube and face side of tool 3168.
^ remove tensioner 3168 from steering column
^ measure dimension d
^ dimension d = 54.5-55.5 mm (2.14-2.18 in.)
^ if dimension d is not attained, install tensioner 3168 and tension spring to correct dimension
CAUTION
Do not over-tension the spring.