Connectors, Terminal Identification

CD changer electrical connectors, terminal identification

CD remote control cable (DIN, black), terminal identification

Note

Illustration at left shows connector end (female) that plugs into CD changer controller. Female connector on CD remote control is also the same.

1 - data bus

2 - not connected

3 - data bus ground

4 - control signal

5 - not connected

6 - plus (+) terminal 30

7 - plus (+) terminal 15

8 - ground (-), terminal 31





CD changer unit cable (DIN, blue), terminal identification

Note

Illustration at left shows connector end (male) that plugs into CD changer controller. Male connector on CD changer unit is also the same.

1 - data bus

2 - signal ground

3 - data bus ground

4 - right channel

5 - left channel

6 - plus (+), terminal 30

7 - plus (+), terminal 15

8 - ground (-), terminal 31


CD changer electrical connectors, terminal identification 91-13-1





Eight-point radio connector (female, gray), terminal identification

1 - not connected

2 - ground

3 - plus (+), radio ON

4 - not connected

5 - plus (+) radio ON

6 - plus (+) terminal 58b

7 - Gplus (+) terminal 30

8 - ground (-), terminal 31





Four-point connector (male, on radio interface wiring harness), terminal identification

1 - plus (+), terminal 30

2 - plus (+), terminal 15

3 - ground (-), terminal 31

4 - control signal