Ribbed Belt, and Pulley, Assembly Overview
Ribbed belt and pulley, assemblyNote: There are two different types of ribbed belt, identified as versions A and B.
Ribbed belt versions, identifying, refer to Application and ID Application and ID
Illustration shows only version B.
1. Tensioner
Loosening, refer to Ribbed Belt/Removing and Installing Ribbed Belt, Removing and Installing
2. 55 Nm (41 ft lb)
3. 20 Nm (15 ft lb)
4. 20 Nm (15 ft lb)
5. Ribbed belt
Removing and installing, Ribbed Belt/Removing and Installing Ribbed Belt, Removing and Installing
Checking pulley alignment, refer to Testing and Inspection/Procedures Testing and Inspection
6. Belt routing w/o A/C
Not applicable to vehicles for USA and Canada
7. Bolt
Always replace
Use only new double hex head (12-pt.) cap screw grade 9.8
Tightening torque (bolt oiled):
200 Nm (148 ft lb) plus 1/2-turn (180°); two 1/4-turns (90°) turns are permissible
Without wrench 2079
Install with crankshaft tool 3242, refer to Toothed Belt/Service and Repair Service and Repair.
8. 20 Nm (15 ft lb)