Steering Assembly - R and R

Group: 48

Number: 92-04

Date: 04/27/92

Subject:
Steering Assembly Removing And Installing

Model(s):
100, 100S, 100CS (M.Y. 1993 Canada) M.Y. 1992

This TECHNICAL BULLETIN SUPERSEDES TECHNICAL BULLETIN GROUP 48, NO. 92-01 DATED 02/20/92. NEW INFORMATION IS IN CAPITAL LETTERS.





If for any reason the tilt/telescopic steering assembly has to be either disconnected and/or removed, a spacer sleeve must be used to correctly set the distance for the telescopic shaft.

This spacer sleeve can be ordered through your Parts Department under Part Number 4A0 419 913.

NOTE:
TWO PARTS (P/N 4A0 419 913) MUST BE ORDERED TO GET A COMPLETE SET.

To prevent repair delays, it is suggested that at least one set of these sleeves be ordered now and stored as a special tool.