Instrument Panel Switch Bulbs, Removing and Installing

NOTE: The radio does not have to be removed.


Removing
- To prevent scratches, place masking tape on area above switches.





- Insert a small screwdriver or flat plastic wedge (upper arrow) on top of switch as shown.
- Press on bottom of switch button (lower arrow) while carefully prying out top.
- Remove switch button.


NOTE:






- Bulb in switch -A- cannot be replaced
- Bulb in switch -B- can be replaced
- Emergency flasher switch has 2.0 watt bulb, all other switch bulbs are 0.8 watt
- Pull bulb out forwards using pliers.

Installing
- Press bulb into switch.
- Press button onto switch until button clicks into position.