Power Windows, Rear Assembly

NOTE:
- Refer to appropriate wiring diagram for electrical repairs
- Individual mechanical portions of window regulator mechanism are available as replacement parts
- After removal and installation of door component carrier or window regulator door glass height must be adjusted

Power Windows, Rear Assembly:

1 - Left rear window switch -E52-
2 - Inner door opening mechanism
3 - Door glass, left rear
4 - Screw, window regulator
- Tightening torque: 10 Nm (7 ft lb)
5 - Window guide
6 - Door component carrier
7 - Screw
- Tightening torque: 10 Nm (7 ft lb)
8 - Washer
9 - Locking clip, window glass
10 - 2-point connector, left rear window regulator
11 - Torx screws
- Tightening torque: 4.5 Nm (40 in lb)
12 - Left rear door window motor -V26-
13 - Window regulator assembly
14 - Washer
15 - 2-point connector for window switch, left rear
- Remove door trim for access
16 - Wiring harness