Installation

- Routing of ribbed belt on vehicles with out A/C.




- Routing of ribbed belt on vehicles with A/C.








- Reinstall viscous fan frame and viscous fan, with ribbed belt using torque wrench 1331, and fork wrench 3312.

VISCOUS FAN TO CARRIER TORQUE
Without fork wrench 3312 [1] 70 Nm (52 ft lb)

With fork wrench 3312 and torque wrench 1331 37 Nm (27 ft lb)

With fork wrench 3312 and without torque wrench 1331:
220 mm torque wrench [2] 33 Nm (24 ft lb)
280 mm torque wrench [2] 37 Nm (27 ft lb)
300 mm torque wrench [2] 39 Nm (29 ft lb)
440 mm torque wrench [2] 45 Nm (33 ft lb)


_______________________________

[1] If fork wrench 3312 is not used, torque wrench length does not effect bolt torque.

[2] When using fork wrench 3312, applied torque is affected by torque wrench length. Torque wrench length is measured from center of socket to center of handle.

- Secure bowden cable at clamping piece (5) without pretension on locking lever (4).

NOTE: Bend over end of cable after securing.

- Reinstall lock carrier plate.

- Readjust headlights, if necessary.