Door Window Seal - Wind Noise, Checking

Group: 57

Number: 92-07

Date: 10/15/92

Subject:
Wind Noise, Door Window Seal, Checking

Model(s):
100
1992 - 1993 m.y.

Check/inspect for condition(s) described in this Bulletin when performing the initial Delivery Inspection. When necessary perform corrective action(s) as outlined prior to delivery to the customer.





Door window, adjusting

- adjust adjustable window stop of window lifter -1- with external Torx socket E6.
- contact area -B- of window at inner sealing lip.

Note
Door/window adjustment(s) may affect door closing effort. After adjusting door and window seals always recheck door closing effort.





Door window, adjusting
- adjust window -2- with door closed.
- adjust upper stop of window lifter so that inner sealing lip of door window seal -1- contacts upper window edge in entire area -B- under pretension.
^ a = at least 0.5 mm
- do not adjust window too high as otherwise greater door closing forces result.

CAUTION
Tight seal is only assured when sealing lip contacts window with at least 0.5 mm pretension.





Door carrier components, reference dimensions
- outer sealing lip -2- must contact entire contour of pillar and rooftop strip -1-.
- distance between roof trim strip -1- and door window -3-
^ a = 6.5 +/- 1 mm