Engine Lubrication: Locations

Lubrication system

Component layout, engine code AAH up to 8.94

Revised lubrication system from 8.94, refer to Engine Code AAH From 8/94, Engine Code AFC

CAUTION: Do NOT overfill with oil past the MAX mark on the oil dipstick. Damage to the three way catalytic converter could result.
Oil filters for earlier and later version lubrication systems are NOT interchangeable.

Note: Always replace gaskets and seals.
Replacing crankshaft oil seals, refer to Cylinder Block Assembly/Crankshaft Main Bearing Seal/Service and Repair Service and Repair and Front Crankshaft Seal/Service and Repair Service and Repair






1. 10 Nm (7 ft lb)
2. 10 Nm (7 ft lb)
3. Oil pan, upper
4. Oil pan, lower
5. 10 Nm (7 ft lb)
6. 30 Nm (22ft lb)
7. 10 Nm (7 ft lb)

8. Oil pressure relief valve
Opening pressure: 16 bar (232 psi)
Cannot be checked with normal workshop equipment

9. Cover plate
10. 10 Nm (7 ft lb)
11. 40 Nm (30 ft lb)