Tightening Torques

Bolts Securing Engine To Transmission (6-cylinder engine)






A, B Dowel sleeves for alignment/centering

Other Fasteners
Drive axle to flanged shaft
- M8, 45 Nm (33 ft 1b)
- M10, 80 Nm (59 ft 1b)
Shift rod to transmission
- 20 Nm (15 ft lb)
Torque support to body
- 45 Nm (33 ft lb)
Clutch slave cylinder to transmission
- 25 Nm (18 ft lb)
Transmission support to subframe
- 45 Nm (33 ft lb)
Crossmember to body
- 45 Nm (33 ft lb)
Driveshaft to manual transmission and final drive
- 55 Nm (41 ft lb)

Note: Mounting bolts for the driveshaft are self-locking; always replace.