Rear Brake Caliper Assembly

REAR BRAKE CALIPER, ASSEMBLY

CAUTION!
use all parts supplied in repair kit.

1 - 35 Nm (26 ft lb)
^ always replace
^ hold guide pin when loosening/tightening

2 - Brake caliper housing
^ replace housing if leaking at parking brake lever

3 - Piston seal
^ removing, -> Fig. 3

4 - Piston
^ removing, -> Fig. 1
^ installing, -> Fig. 5
^ diameter: 38 mm

5 - Protective seal
^ installing, -> Fig. 2 and Fig. 4

6 - Brake pad carrier

7 - Bleeder screw

8 - Dust cap

9 - Guide pins
^ grease protective caps before installing

10 - Protective cap