Alignment - Specifications for Pulling/Drifting
Group: 44Number: 92-04
Date: 10/15/92
Subject:
Pulling/Drifting
Model(s):
90 All
1993 m.y.
Check/inspect for condition(s) described in this Bulletin when performing the initial Delivery Inspection. When necessary perform corrective action(s) as outlined Prior to delivery to the customer.
Condition:
Vehicle tends to pull to one side. Driver must compensate by correcting steering wheel position.
Service:
Check and correct wheel alignment front and rear.
Notes for wheel alignment Use optical alignment equipment to check wheel alignment.
When to check wheel alignment
^ after at least 1000-2000 km (600-1200 miles), once coil springs have settled.
Checking requirements
^ alignment equipment properly calibrated.
^ vehicle at curb weight (fuel tank full, spare tire and jack in place).
^ tire pressure at specification (see sticker on car)
^ vehicle correctly positioned and suspension bounced several times.
^ no excessive play or damage to steering, steering linkage or suspension.
Wheel alignment specifications
Quattro
Wheel alignment specifications
2 Wheel Drive