Sunroof Control Module/Motor, Removing and Installing

Sunroof control module/motor, removing and installing





Removing

- Remove sunroof motor.

- Disconnect harness connectors -A-, -B-, -C-.

- Remove plugs (arrows), take off control module.


Installing

Install in reverse order of removal, noting the following:

- Ensure plugs are reinstalled.

Note: Sunroof motor must be set to "0" position before installing into vehicle

- Set control switch to position 2.

- Switch ignition ON.

Sunroof motor will automatically move to "0" position.

- Install sunroof motor into vehicle.