Condenser Fan: Locations

Cooling Fan/Radiator Assembly





1 Coolant pipe

2 Connector
• For Engine Coolant Level (ECL) warning switch -F66- in expansion tank

3 Expansion tank
• With Engine Coolant Level (ECL) warning switch -F66-

4 Cap

5 10 Nm (7 ft lb)

6 Fan with viscous clutch
• "FRONT" marking on outer fan ring must point in direction of travel
• Switching temperature 76° ± 4°C (169° ± 39°F) ambient temperature at viscous clutch
• Tightening torque depends on tools used
• Right-hand thread

7 Fan frame

8 10 Nm (7 ft lb)

9 Coolant Fan Control (FC) thermo- switches -F18- and -F54-
• 25 Nm (18 ft lb)
• Switching temperatures:
1 =1st stage:
on at 92°-97°C (198°-207°F)
off at 84°-91°C (183°-196°F)
2 = 2nd stage:
on at 99°-105°C (210°-221°F)
off at 91°-98°C (196°-208°F)
+ = Battery Positive Voltage (B+)

10 10 Nm (7 ft lb)

11 Packing

12 Bonded rubber bushing

13 Left air guide

14 Radiator

15 Upper air guide

16 10 Nm (7 ft lb)

17 Angle bracket

18 Rubber grommet
• For angle bracket

19 Right air guide

20 Lower air guide

21 10 Nm (7 ft lb)
• Important: Left-hand thread

22 Lock washer
• Grabs into fan
• Bend over one tooth to lock nut

23 Fan

24 Washer

25 Coolant fan motor

26 10 Nm (7 ft lb)

27 Fan frame
• For electric coolant fan

28 10 Nm (7 ft lb)

29 Clip
• For wiring to coolant fan motor