5TH and 6TH Gear (6-Speed)

1 - 1st inner race/input shaft ball bearing

2 - Needle bearing for 5th gear

3 - Inner race of 5th gear

4 - 5th gear

5 - Split pin
^ Solid pin from 01/92

6 - Driver
^ Replace together with shift rod for 5th gear

7 - 5th gear shift fork
^ Can be replaced individually

8 - Spacer disc
^ Installation position: larger diameter faces bearing flange

9 - 5th gear shift rod

10 - Operating sleeve, synchronizer ring, synchronizer hub for 5th gear

11 - Circlip
^ Redetermining

12 - 5th gear
^ Pulling off
^ Pressing on

13 - Shim
^ Calculating

14 - Spacer sleeve
^ Length: 72.5 mm (2.854 in.)

15 - Circlip

16 - Roller bearing inner race
^ Remove by hand