Bleeding Clutch Hydraulic System
Clutch system, bleedingCAUTION: Before bleeding the clutch system, fill the brake fluid reservoir to the MAX tine with brake fluid.
Bleed clutch system, as follows:
Use brake bleeder device with maximum operating pressure of 2.5 bar (36.3 psi).
Use bleeder wrench 3237anc 670 mm bleeder hose VAG 1238 53
Connect bleeder hose to pressure hose of receiving bottle A, as shown
Connect bleeder hose to bleeder wrench
Remove left air intake pipe
Guide bleeder wrench/hose between left: ignition distributor and top of strut, over to slave cylinder on transmission
Attach bleeder wrench/hose to bleeder valve. Open valve
CAUTION: During this procedure, be sure all bleed connections remain sealed.
Operate clutch pedal several times when bleeding is complete