Handset Cradle - Removing/ Installing
HANDSET CRADLE, REMOVING/INSTALLINGS4
The cradle (arrow) is attached to the driver armrest with four screws.
- lift phone from cradle
- remove rubber screw caps from two rear screws
- remove four screws and lift out cradle
- install in reverse order of removal 100, 100CS
REMOVING
- remove upper handset cradle screws and remove upper handset cradle -3-
- remove lower handset cradle screws and remove lower handset cradle -2-
- remove handset bracket screws and remove handset bracket -1-
INSTALLING
- install handset bracket -1- into tray so that front bracket flange engages front lip of tray
- using a magnetic screwdriver, install and tighten handset bracket screws
- install lower handset cradle -2- onto bracket so slotted end faces forward
CAUTION!
Do not overtighten lower handset cradle screws or damage will result.
- snug lower handset cradle screws, do not overtighten
- install upper handset cradle -3- so that handle faces rearward
- tighten upper handset cradle screws
- install rubber plugs in rear screw holes of handset cradle