Track 27 Thru 38

ABS - Track 27-38:

COMPONENTS
J104 - ABS (Control Module (w/EDL)
K47 - ABS Warning Light
K - DLC (Data Link Connector) Rapid Data Transfer
J4 - Dual Horn Relay
S19 - Fuse
K2 - Generator (GEN) Warning Light
C - Generator (GEN)
J268 - Mini Check System Control Module
B - Starter
J217 - Transmission Control Module (TCM)
C1 - Voltage Regulator (VR)

CONNECTORS
T2 - Double Connector,white, Data Link Connector, on auxiliary relay panel I
T2b - Double Connector, black, Data Link Connector, on auxiliary relay panel I
T2c - Double Connector, brown, near starter
T6d - 6-Pin Connector, gray, connector station 2
T6ao - 6-Pin Connector, orange, connector station 1
T26a - 26-Pin Connector, green, on instrument cluster
T26 - 26-Pin Connector, red, on instrument cluster

GROUND CONNECTIONS

NOTE: Ground connections are indicated on the diagrams by a numeric code inside a circle.

6 - Ground strap, engine to generator
44 - Ground connection, on left A-pillar, lower part
81 - Ground connection -1-, in instrument panel wiring harness
100 - Ground connection -1-, in ABS wiring harness

HARNESS SPLICES

NOTE: Harness splices are points inside a wiring harness where two or more wires are crimped and/or soldered together. Harness splices are indicated on the diagrams by an alphanumeric code inside a circle.

A17 - Wire connection (61), in instrument panel wiring harness
A38 - Plus connection (15a II), in instrument panel wiring harness