Without OBD II - 2.8L, 6 Cylinder
Without OBD II - 2.8L, 6 CylinderDiagrams By Track Number
6-Cyl MFI (Multipoint Fuel Injection) - Track 28-41:
Fuse colors
30 A - green
25 A - white
20 A - yellow
20 A - blue
15 A - red
5 A - beige
Track Continuations
Previous Diagram Track 15 - 27
Next Diagram Track 42 - 54
To Refer to
42 Tracks 42-51 Track 42 - 54
82 Tracks 79-90 Track 79 - 90
COMPONENTS
G40 - Camshaft Position (CMP) Sensor
N30 - Cylinder 1 Fuel Injector
N31 - Cylinder 2 Fuel Injector
N32 - Cylinder 3 Fuel Injector
N33 - Cylinder 4 Fuel Injector
N83 - Cylinder 5 Fuel Injector
N84 - Cylinder 6 Fuel Injector
N128 - Ignition Coil 2
N158 - Ignition Coil 3
N - Ignition Coil
S72 - Injector Valve Circuit Breaker
S103 - Ignition Coils Circuit Breaker
J192 - MFI Engine Control Module (ECM)
P - Spark Plug Connectors
Q - Spark Plugs
CONNECTORS
T3o - 3-Pin Connector, white, on firewall, center
GROUND CONNECTIONS
NOTE: Ground connections are indicated on the diagrams by a numeric code inside a circle.
32 - Ground connection, behind instrument panel, left
59 - Ground connection, near taillight, left
85 - Ground connection -1-, in engine compartment wiring harness
86 - Ground connection, in rear wiring harness
182 - Ground connection -1-, in engine compartment wiring harness (6 cylinder)
HARNESS SPLICES
NOTE: Harness splices are points inside a wiring harness where two or more wires are crimped and/or soldered together. Harness splices are indicated on the diagrams by an alphanumeric code inside a circle.
D95 - Wire connection (injectors), in engine compartment wiring harness
D131 - Wire connection (15), above circuit breaker, in engine compartment wiring harness