Instrument Cluster, Removing & Installing

- Obtain radio security code.
- Disconnect battery ground strap.
- Disconnect airbag voltage supply connector.
Located in passenger footwell area above electronic control box

WARNING!
Always disconnect airbag voltage supply connector before working on any airbag or steering column component.

- Remove steering wheel and steering column switch assembly.





- Remove screws -2- and remove cover strip-1-.
- Remove mounting screws (arrows).





- Carefully pull instrument cluster from instrument panel.
- Disconnect electrical connectors and remove instrument cluster.

Install in reverse order of removal.

- Recode radio.

Emergency flasher relay -J2-, installation position





Relay (arrow) is located behind the instrument cluster and is attached to the instrument panel with a clip.

Warning buzzer -H3-, or radio/parking light warning buzzer -J152-, installation position





Warning buzzer (arrow) is mounted on the side panel of the instrument cluster and is attached with a clip.