Without OBD II - 2.8L, 6 Cylinder
Without OBD II - 2.8L, 6 CylinderDiagrams By Track Number
Instrument Cluster - Track 124-134:
Fuse colors
30 A - green
25 A - white
20 A - yellow
20 A - blue
15 A - red
5 A - beige
Track Continuations
Previous Diagram Track 117 - 123
Next Diagram Track 135 - 148
To Refer to
21 Tracks 15-27 Track 15 - 27
163 Tracks 163-176 Track 163 - 176
217 Tracks 213-226 Track 213 - 226
224 Tracks 213-226 Track 213 - 226
247 Tracks 237-248 Track 237 - 248
COMPONENTS
G111 - A/C Compressor Speed Sensor
J104 - ABS Control Module
J106 - ABS Solenoid Relay
K47 - ABS Warning Light
K2 - GEN (Generator) Warning Light
K1 - Headlight High Beam Indicator Light
L10 - Instrument Panel Light
G21 - Speedometer
K64 - Turn Signal Indicator Light, right
K65 - Turn Signal Indicator Light, left
CONNECTORS
T6b - 6-Pin Connector, red, connector station 2
T6c - 6-Pin Connector, green, connector station 2
T6ac - 6-Pin Connector, blue, connector station 1
T26 - 26-Pin Connector, red, on instrument cluster
T26a - 26-Pin Connector, green, on instrument cluster
GROUND CONNECTIONS
NOTE: Ground connections are indicated on the diagrams by a numeric code inside a circle.
81 - Ground connection -1-, in instrument panel wiring harness
85 - Ground connection -1-, in engine compartment wiring harness
HARNESS SPLICES
NOTE: Harness splices are points inside a wiring harness where two or more wires are crimped and/or soldered together. Harness splices are indicated on the diagrams by an alphanumeric code inside a circle.
A38 - Plus connection (15a II), in instrument panel wiring harness