Without OBD II - 2.8L, 6 Cylinder
Without OBD II - 2.8L, 6 CylinderDiagrams By Track Number
GEN (Generator) Starter - Track 15-27:
Fuse colors
30 A - green
25 A - white
20 A - yellow
20 A - blue
15 A - red
5 A - beige
Track Continuations
Previous Diagram Track 1 - 14
Next Diagram Track 28 - 41
To Refer to
127 Tracks 124-134 Track 124 - 134
138 Tracks 135-148 Track 135 - 148
145 Tracks 135-145 Track 135 - 148
151 Tracks 149-162 Track 149 - 162
156 Tracks 149-162 Track 149 - 162
COMPONENTS
A - Battery
J7 - Battery Cut-Out Relay
V94 - Central Locking/Alarm System/Interior Light
Delay Control Module
J13 - Fresh Air Blower Relay
C - GEN (Generator)
F125 - Multi-Function Transmission Range (TR) Switch
J226 - PNP (Park/Neutral Position) Relay
U6 - Start Socket
B - Starter
C1 - VR (Voltage Regulator)
CONNECTORS
* - Vehicles with Automatic Transmission T2c - Double Connector, brown, near starter
T6d - 6-Pin Connector, gray, connector station 2
T6aa - 6-Pin Connector, red, connector station 1
T6an - 6-Pin Connector, white, connector station 2
T6at - 6-Pin Connector, brown, connector station 3
T16 - 16-Pin Connector, connector C on V94, under rear seat, right
GROUND CONNECTIONS
NOTE: Ground connections are indicated on the diagrams by a numeric code inside a circle.
1 - Ground strap, battery to body
6 - Ground strap, engine to generator
17 - Ground connection, intake manifold
81 - Ground connection -1-, in instrument panel wiring harness
182 - Ground connection -1-, in engine compartment wiring harness (6-cylinder)
183 - Ground connection -2-, in engine compartment wiring harness (6-cylinder)
HARNESS SPLICES
NOTE: Harness splices are points inside a wiring harness where two or more wires are crimped and/or soldered together. Harness splices are indicated on the diagrams by an alphanumeric code inside a circle.
A17 - Wire connection (61), in instrument panel
P2 - Plus connection (30), in battery wiring harness